Studded Faux Leather Chest Harness with O-Rings

This black faux leather chest harness is built around an X-strap configuration that crosses at the sternum and secures with two polished O-rings — one centered at mid-chest, one at the underbust band — giving the silhouette a structured, architectural look distinct from plain buckle or single-ring designs.

Stud and Eyelet Hardware Detail

Every strap edge is lined with silver dome studs and open eyelet grommets, running in a continuous double row from shoulder to waist. The hardware is uniform gunmetal-silver tone throughout, so the stud detail and the O-ring hardware read as a single intentional design rather than mixed metalwork. The straps are approximately 2.5 cm wide, thick enough to hold shape without needing internal boning.

• Dual O-rings — one chest, one underbust band — provide two anchor points for layering chains or clips
• Silver dome studs run the full length of each strap, approximately 1 cm spacing
• Open eyelet grommets alternate with studs along the strap edges for edge definition
• All hardware is silver-tone zinc alloy, not painted plastic

Chest Harness Sizing and Fit

The harness fits a chest circumference of roughly 80 cm to 115 cm via the buckle adjusters at each shoulder strap and the back closure. The underbust band sits approximately 10-12 cm below the center O-ring, so torso length between 40-55 cm works best. Very short torsos may find the underbust band sits too low; in that case size down and adjust the shoulder straps fully up.

• Adjustable shoulder straps: range approx 30-45 cm each side
• Underbust band: adjustable from 70 cm to 110 cm at the back closure
• Recommended chest size: 80-115 cm (XS through XXL body frames)
• Not recommended for chest sizes above 120 cm — the O-ring center point shifts position

Faux Leather Material and Care

The straps are constructed from smooth-surface faux leather (PU-coated polyester backing) — firm enough to hold the stud hardware flat without wrinkling, while remaining flexible enough to wear for several hours without edge irritation on the skin. The material has no lining on the body-contact side, so wearing over a base layer is advisable during extended use. Wipe clean with a damp cloth; do not machine wash or submerge, as prolonged moisture weakens the PU coating at the stud punch points.

Styling for Festival and Evening Occasions

The narrow black strap-and-stud profile layers cleanly over a plain white or black fitted tee without the straps bunching. For a festival outfit, pair over a mesh long-sleeve top and high-waist trousers — the O-rings at the underbust create a natural focal point above the waistband. For a evening aesthetic, wear the harness directly on skin over wide-leg trousers, letting the stud rows frame the chest. The dual O-ring system also accepts clip-on chain extensions (sold separately) to build a layered chest-harness look without buying a new piece.