
Underwear, leggings, nightwear and other accessories used for styling in the photos are not included unless clearly stated.
Sexy Harness
Chest Harness with Intersecting Straps & O-Rings
Color
Size
- SKU
- APFTM75-S1
- Weight
- 0.200
- Categories
- Mens Harness
Product Info
Black faux leather chest harness with gold O-rings and bold intersecting geometric strap design.
- ✓Black vegan faux leather straps, approximately 1.5 cm wide throughout
- ✓Three gold-tone zinc-alloy O-rings: one 3.5 cm center chest, two 2.5 cm lower
- ✓Adjustable buckle closures covering chest circumference 80-110 cm
- ✓Torso length adjustment for approximately 40-55 cm torso range
- ✓Two-piece set includes matching black faux leather wrist cuff
- ✓Geometric intersecting strap layout forms structured triangular chest pattern
- ✓Hardware finish is plated zinc-alloy, keep dry to preserve gold tone
- ✓Not suitable for chest circumference above 115 cm due to buckle range limits
The black faux leather chest harness layers multiple narrow straps across the chest in a geometric intersecting pattern, anchored at three points by gold-tone O-rings — one at the center chest and two at the waist band — creating a structured triangular silhouette rather than a simple two-strap cage. The straps measure approximately 1.5 cm wide, keeping the look sharp without adding bulk.
Chest Harness Styling & Occasions
Worn over bare skin, it works as a festival chest harness layered under a sheer shirt or open jacket. For a party look, pair it with high-waist trousers and nothing underneath for a bold fashion-forward outfit. For editorial photography, the geometric gold hardware reads well against skin tones under warm studio lighting. The wrist cuff shown in images is included, adding a coordinated accessory without requiring a separate purchase.
- Festival ready: layer over a mesh top or cropped tee
- Party styling: wear against bare skin under an open blazer
- Evening aesthetic: strong geometric lines photograph with graphic impact
- Streetwear edge: stack over a fitted black long-sleeve for subtle harness detail
Sizing & Fit Measurement Guide
The harness is built for a chest circumference of roughly 80-110 cm, with fully adjustable buckle closures on the shoulder strap and the waist band. The shoulder-to-waist distance adjusts independently, which suits torso lengths from approximately 40-55 cm. Narrower torsos (under 80 cm chest) may find the waist band sits higher than intended; broader frames above 115 cm may reach the outer limits of the buckle adjustment. One size fits most with those ranges in mind.
- Chest range: approximately 80-110 cm (adjustable buckles)
- Torso length range: approximately 40-55 cm
- Strap width: 1.5 cm narrow profile
- Wrist cuff circumference: adjustable up to approximately 20 cm
- Not recommended for chest circumference above 115 cm as buckle range is limited
Harness Set Contents & Hardware
The package includes the chest harness and one matching black faux leather wrist cuff, making it a two-piece coordinated set. The O-ring at the center chest measures approximately 3.5 cm diameter; the two lower O-rings are slightly smaller at roughly 2.5 cm diameter. All metal components share the same gold-tone finish for visual consistency. The total weight of the set is light enough that the shoulder strap does not dig in during extended wear — a practical advantage over heavier chain harnesses.
Underwear, leggings, nightwear and other accessories used for styling in the photos are not included unless clearly stated.
Specifications
| Product name | Chest Harness with Intersecting Straps & O-Rings |
|---|---|
| Category | Mens Harness |
| Product code | APFTM75-S1 |
| Brand | Angels Passion |
| Colour | Black, Red |
| Sizes | XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL |
| Weight | 0.2 kg |
| Gender | Men |
| Country of origin | Türkiye |
Material & Care
| Care instructions | Wipe with damp cloth and mild soap; air dry flat; no machine wash |
|---|---|
| Lining | No lining; single-layer PU strap construction |
| Closure | Adjustable metal buckles on shoulder and waist straps |
| Material | Vegan faux leather, PU-coated surface, semi-gloss finish |
Faux Leather Material & Care
The straps are constructed from vegan faux leather over a flexible PU base, giving the smooth, semi-gloss finish visible in the image without using animal-derived materials. The gold O-rings and buckle hardware are zinc-alloy with a gold-tone plating — durable under normal wear but should be kept dry to preserve the finish. Do not machine wash; wipe the straps with a damp cloth and mild soap, then air dry flat. Avoid prolonged exposure to direct sunlight, which can cause the faux leather surface to crack over time.
- Material: vegan faux leather (PU-coated)
- Hardware: gold-tone zinc-alloy O-rings and buckles
- Care: wipe clean with damp cloth, air dry — no machine washing
- Avoid soaking or prolonged sun exposure to prevent surface cracking
Shipping
Your order is delivered in about 2 business days.
Returns
For hygiene reasons this product group is exempt from the right of withdrawal; returns and exchanges are not accepted.
This restriction never applies to a wrong, missing or faulty delivery — in that case your exchange or refund starts immediately.
Frequently Asked Questions
Chest Harness with Intersecting Straps & O-Rings
$68.46
















