Black Full Body Harness with Triple O-Rings and Silver Buckles

The Full Body Harness with Detachable O-Ring Chain covers chest, torso, and hips in a single structured piece — three stacked horizontal bands in black faux leather, each anchored at center by a silver O-ring, run from a halter neck to a lower hip band that wraps around the upper thighs. A vertical front spine strap connects all three rings, creating a cage-like silhouette without any mesh or fabric fill. The detachable chain links the chest O-ring to the waist O-ring and can be removed in seconds via lobster-claw clasps.

Strap Layout and Hardware

Four silver-tone rectangular buckles — two on the shoulder bands and two on the side torso bands — allow independent width adjustment at each section. The strap width measures approximately 1.5 cm throughout, keeping the profile sleek against skin or worn over a bodysuit. Hardware is nickel-free silver-tone metal; O-rings are solid, not split.

• Three stacked O-rings at chest, waist, and hip — structural focal points
• Vertical spine strap links all three rings front-center for the cage effect
• Detachable chain secured by lobster-claw clasps — removable without tools
• Four silver rectangular buckles, each adjustable by approximately 6 cm range
• Strap width: 1.5 cm flat faux leather throughout

Boudoir and Festival Styling

Worn directly over bare skin, the harness reads as lingerie-forward boudoir fashion; over a nude or sheer bodysuit (as shown) it becomes a festival or concert statement piece. Pair the full rig with high-waisted wide-leg trousers and a blazer for editorial styling — the chest band and chain are visible above any low neckline. For a boudoir set, layer over a black lace bralette and matching briefs; the hip strap frames the waistband. The detachable chain is versatile: worn it adds movement, removed it gives a cleaner geometric line for photography.

• Over sheer bodysuit: festival, concert, or rave look
• Over lace bralette: boudoir photography or intimate fashion
• Chain removed: cleaner silhouette for editorial or stage styling

Sizing and Fit Notes

The four buckles adjust the chest band and the lower torso bands independently. The chest band fits 75-110 cm bust circumference; the hip band fits 80-120 cm hip circumference. Halter-neck tie is adjustable for torso lengths from approximately 38-52 cm shoulder to waist. The harness sits best on torso lengths in that range — very short or very long torsos may find the O-ring placement shifts above or below the intended chest / navel / hip points. The design is sized XS to 3XL; above a 110 cm bust or 120 cm hip, strap tension may be insufficient for a secure fit — this is an honest trade-off of the current buckle range.

Faux Leather Material and Care

Straps are cut from PU faux leather — a polyurethane-coated polyester base that gives the glossy black finish visible in the image. The material is animal-free and does not require conditioning. Wipe clean with a damp cloth and mild soap; do not submerge in water or machine wash, as prolonged soaking separates the PU coating from the base layer. Air dry flat away from direct heat. The silver-tone hardware is zinc-alloy with a nickel-free plating; avoid contact with perfume or sweat for extended periods to maintain finish. With proper care, the faux leather stays supple for regular wear over 12+ months.