Black Faux Leather Handcuff Set with Detachable Chain

This black faux leather handcuff set pairs two wide-band wrist cuffs — each approximately 5 cm wide — with a detachable silver-tone O-ring link chain that connects them through a central vertical strap. The hardware is fully silver-tone, including the swivel clasps, O-rings, and press-stud rivets that run along every strap panel.

Styling for Evening and Festival Looks

The detachable chain is what separates this set from a standard wrist cuff pair. Worn connected, the linked configuration creates a striking evening aesthetic over a sheer bodysuit or corseted top. Disconnect the chain and each cuff stands alone as a chunky faux leather wrist accessory layered over a mesh sleeve or a long-sleeve festival look. The upper central strap — which terminates in a curved tab — can loop onto a collar or neck ring for a full-body harness integration.

• Connected chain configuration: dramatic focal point over sheer or open-back tops
• Single cuff worn solo: pairs with oversized jacket sleeves for an edgy daywear contrast
• Central strap tab attachment: compatible with O-ring collars for an extended harness styling

Sizing and Fit Range

Each cuff closes with a single-prong roller buckle and features five adjustable holes spaced approximately 1 cm apart, giving a wrist circumference range of roughly 14 cm to 20 cm. The band width of 5 cm means the cuff sits high on the wrist, so wearers with short forearms should note the cuff will extend toward the lower palm. The set is not recommended for wrist circumferences below 13 cm as the buckle will sit at the extreme end hole.

• Adjustable fit: approximately 14 cm to 20 cm wrist circumference
• Five buckle holes per cuff, spaced 1 cm apart for precise fit
• Cuff band width: approximately 5 cm — sits prominently on the wrist
• Not suited for wrist circumference under 13 cm

Faux Leather Material and Care

The cuffs and connecting straps are constructed from black faux leather — a synthetic PU material that holds its smooth matte finish through regular wear. Silver-tone metal hardware — including swivel clasps and O-rings — is zinc alloy, which resists tarnishing under normal conditions. Trade-off: because the material is PU faux leather rather than genuine leather, prolonged moisture exposure (sweat, rain) can cause surface delamination over time; wipe dry after each use. Clean with a slightly damp cloth and mild soap; do not submerge in water or machine wash.

• Body: black PU faux leather — smooth matte finish, animal-free
• Hardware: silver-tone zinc alloy swivel clasps and O-rings
• Care: wipe clean with damp cloth; air dry flat away from direct heat
• Avoid prolonged moisture contact to prevent surface wear

What the Set Includes

The package contains two individual wrist cuffs, one central connecting strap with riveted O-ring joints, and the detachable O-ring link chain with swivel clasps at each end. The chain detaches by unclipping the swivel clasps, taking under 10 seconds, so you can switch configurations without tools. The central upper strap adds approximately 30 cm of length above the chain junction, giving the set a total linked span suitable for styling across the body.