Adjustable Back Strap Harness with Silver O-Rings

This black faux leather back harness wraps the torso in four large silver O-rings connected by a geometric strap configuration that frames the back from shoulder blades to waistband. Unlike a standard chest harness worn at the front, this piece is engineered entirely for rear-facing visual impact, with a central vertical strap descending to a gold-tone clip at the waist.

Back Strap Design and O-Ring Layout

Four silver O-rings anchor the strap intersections at the upper back, mid-back sides, and lower center, creating a structured diamond-like geometry. Each junction is reinforced with silver rivets that prevent strap slippage under movement.

• Four silver O-rings positioned at upper, mid, and lower back points
• Central vertical strap runs approximately 30 cm from shoulder junction to waist clip
• Side shoulder straps are 1.5 cm wide faux leather bands
• Rivet hardware at every strap crossing for structural stability
• Gold-tone carabiner-style clip at the base for waistband attachment

Festival and Party Styling

Worn over a sheer mesh shirt or directly against bare skin with tailored trousers, this back harness becomes the focal point of a festival outfit or a night-out look. Layer it over a fitted black turtleneck for a streetwear edge, or pair with low-rise jeans so the waist clip and lower O-ring remain visible at the small of the back.

• Over a sheer or mesh top for festival or rave wear
• Against bare skin styled with tailored trousers for a evening-fashion editorial look
• Layered over a fitted black turtleneck for autumn streetwear
• Combined with low-rise denim to show the waist hardware detail

Sizing and Fit Notes

The harness fits chest circumferences from approximately 70 cm to 130 cm thanks to multiple slider buckles on the shoulder and side straps. The vertical back strap length suits torso lengths of 40 cm to 55 cm between the shoulder crosspoint and the waistband. The waist clip attaches to belt loops or a waistband up to 4 cm wide. Note: the clip is fixed-length and is not suitable for torsos shorter than 40 cm without adjustment.

Material and Care

Straps are cut from smooth black faux leather (PU synthetic, animal-free) with a slight sheen visible under direct light. Hardware is silver-tone zinc alloy for the O-rings and rivets, with a single gold-tone zinc alloy clip at the base. Wipe the straps clean with a damp cloth only — do not submerge in water or machine wash, as prolonged moisture weakens the PU adhesive layer. Store flat or loosely coiled to prevent permanent crease marks on the straps.