Y-Strap Back Harness with White Reflective O-Ring Belt

This white reflective strappy back harness crosses over the shoulders in a Y-shaped pattern before running down the spine to a separate waist belt fastened with a center O-ring. The straps are cut from a vegan leather tape finished with a reflective coating that lights up under camera flash or headlights, so in daylight the harness reads as plain white fabric rather than a bright accessory. Black metal grommets hold the shoulder straps to the upper O-ring, and a second O-ring sits at the waist as the belt's focal point. It is built to sit over a bra, bodysuit, or dress rather than as a standalone garment.

Crisscross strap design

The shoulder straps meet at a black metal O-ring between the shoulder blades, then continue as a single spine strap down to the waist O-ring, giving the back a clean vertical line. Adjustable buckles sit at the shoulder straps and at the waist belt, so the crisscross angle and the drop of the spine strap can both be set without changing the labeled size. The layout keeps the front of the body largely bare, with the harness reading mainly from the back and sides.

• Two 2 cm wide reflective straps crossing in a Y pattern at the upper back
• Black metal O-ring at the shoulder junction and a second O-ring at the waist
• Rivets and snap hardware finished in matte black
• Adjustable buckles at both the shoulder straps and the waist belt
• Sold as the harness only, the black bra and briefs pictured are separate items

Styling and occasion

Layer this harness over a plain black bodysuit for a festival outfit, or fasten it over a fitted midi dress for a boudoir-inspired evening look. Over a simple slip dress it also works for a going-out photo set, since the reflective straps read as a clean graphic line against darker fabric. The reflective finish catches camera flash and stage lighting, which makes it a practical pick for night markets, dance floors, or low-light photo shoots where a plain fabric strap would disappear.

Sizing and fit

The harness comes in six labeled sizes, XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL and 6XL/7XL, with the buckle at the waist belt and the buckles at the shoulders setting the fit rather than stretch in the strap itself. Because the fit is buckle-based, the same label can sit slightly looser or tighter depending on how the wearer sets the shoulder straps.

• XS/S and S/M suit a waist near 60 to 75 cm
• L/XL and 2XL/3XL suit a waist near 80 to 105 cm
• 4XL/5XL and 6XL/7XL suit a waist near 110 to 130 cm
• Shoulder straps adjust independently of the waist belt buckle

Material and care

The straps and waist belt are made from vegan leather with a reflective laminate bonded to the face and a woven strap core underneath, so there is no separate fabric lining. Wipe the surface with a damp cloth and mild soap, then air dry away from direct heat, since machine washing or a hot dryer can dull the reflective coating and stiffen the strap over time. The vegan leather resists cracking better than a thin faux leather tape, though the reflective layer can pick up scuff marks if it is dragged over rough surfaces such as concrete or brick.