Y-Back Shoulder Harness in Reflective White with O-Rings

This Y-back shoulder harness uses two reflective white straps that meet at a black O-ring below the nape, then split again at a second O-ring on the spine before angling out toward the underarms. The reflective webbing reads as a soft matte white in daylight and turns bright white under flash or headlights, a detail that sets it apart from solid-color strap harnesses. Matte black rivets pin each strap intersection, giving the piece a structured, symmetrical outline across the upper back that photographs cleanly from any angle.

Y-Back Strap Construction

The strap layout is fully symmetrical: two shoulder straps converge at a rounded connector behind the neck, run down the spine as a single reflective strip, then split into two diagonal straps that reach toward the underarms. Two O-ring connectors mark the convergence points, and every strap end is finished with a black rivet so the reflective webbing does not fray at the edge. Unlike a full chest harness, this piece stays entirely on the back and shoulders, which keeps the front of the torso completely open.

• Reflective faux leather webbing, approximately 1.5 cm wide
• Two black O-ring connectors at nape and mid-spine
• Matte black rivet hardware at each strap intersection
• Adjustable shoulder strap length from 60 to 90 cm

Styling & Occasion

Worn bare-backed with a low-cut top or open-back jacket, the reflective straps stay visible under club lighting and camera flash without needing a separate accessory light. Pair it over a plain black tank at a night festival so the harness reads as the only bright element in the outfit, or layer it under an open denim vest for a going-out look where the straps peek through with each turn. For a boudoir-style shoot, drape it over bare shoulders with the straps as the sole accessory against skin. Because the reflective effect depends on direct light hitting the strap surface, it reads as a soft off-white under regular indoor lighting rather than glowing constantly, a trade-off worth knowing before buying it purely for daytime wear.

Sizing & Fit

The harness ships in six sizes: XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL and 6XL/7XL, so the strap length and O-ring spacing scale with each size rather than relying on one universal fit. The Y-back design sits across the shoulder blades and spine; it does not include a front chest panel, so it will not suit anyone looking for full front coverage or a corset-style silhouette. Because the straps are pre-cut per size rather than infinitely adjustable, checking shoulder width against the size chart before ordering is worth the extra minute.

• XS/S and S/M for narrower shoulder width and shorter torso
• L/XL as the mid-range fit for an average build
• 2XL/3XL and 4XL/5XL for broader shoulders and longer spine
• 6XL/7XL as the largest strap-length option in this range

Material & Care

The straps are made from reflective faux leather webbing with matte black metal hardware; no animal leather is used anywhere in the construction. The single-layer strap is unlined, which keeps the total weight under 150 grams but means the reflective surface should be wiped rather than scrubbed. Clean with a damp cloth and mild soap, then air dry away from direct heat; avoid machine washing and tumble drying, since repeated agitation can dull the reflective coating and loosen the rivet hardware over time. With normal wear, the O-ring connectors and rivets hold up well, though the reflective coating is the one component that will visibly fade first.