Underbust Cage Harness with White Reflective Trim and Chain

This white reflective cage harness pairs a halter-neck bodice with a caged waist panel built from crisscrossed reflective strapping, finished with a draped silver chain at the front. The straps are cut from a matte-white synthetic material that flashes bright under camera light or a phone flash, which is why it shows up so clearly in low-light or nightclub photography. A trio of adjustable buckles at the back and one at the underbust lets you dial in the fit over a bodysuit, slip dress, or bare skin.

Caged Waist Design

The waist section is built from a basket-weave grid of reflective strips riveted at each intersection, creating an open cage effect rather than a solid band, so skin and any layer worn underneath show through the gaps. Underneath the cage, three thin reflective straps drop down and connect to a draped silver-tone chain that swings free at the front hip, adding movement when you walk.

Styling the Cage Harness

Layer the harness over a fitted black slip dress or bodycon skirt for a festival-ready silhouette, letting the chain drape sit against the fabric rather than skin. For a boudoir look, wear it alone over a black bralette and high-waist briefs so the caged waist panel sits directly on skin and the reflective strapping catches whatever light is in the room.

• Black slip dress plus ankle boots for a night-out silhouette
• Black bralette and briefs for an at-home boudoir set
• Sheer black tights and a mini skirt for a rave-ready layer

Sizing and Fit

This harness is offered in six size labels: XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL, and 6XL/7XL, so check your underbust and waist measurement against the size chart before ordering rather than guessing from a dress size. The back straps have roughly 8cm of buckle adjustment, which helps fine-tune fit within each labeled range but will not bridge two size labels if your measurement falls between them.

• Best for underbust and high-waist measurements that fall within your labeled range
• Not recommended if you need more than 8cm of adjustment beyond your size label
• Halter strap sits at the nape of the neck and is fixed in length, not adjustable

Hardware Notes

All buckles and the front chain are finished in a silver tone that contrasts against the white reflective strapping, and the chain drape hangs free from two anchor points rather than clipping at a third.

Material and Care

The straps and cage panel are made from a white reflective faux leather strap material bonded to a reflective film backing, with silver-tone metal hardware at the buckles and chain. Wipe the strapping clean with a soft, slightly damp cloth and let it air dry flat; avoid machine washing, tumble drying, or a hot iron, all of which can dull the reflective coating or delaminate the film over time. With normal handling the riveted joints on the cage panel hold up to repeated wear, though the reflective finish will show scuffing faster than a plain matte strap material, which is the honest trade-off of a strap built to catch light.