Strappy Faux Leather Body Harness with O-Rings & Studs

This black faux leather chest harness is built around a Y-frame strap configuration — two shoulder straps angle outward from a central sternum O-ring, then cross at the underbust into a mirrored band, creating a structured cage silhouette without extra bulk. The hardware is uniformly silver-tone: three circular O-rings (shoulder, chest, and underbust) plus evenly spaced flat stud rivets along each strap.

Strap Layout & Hardware Detail

Unlike single-band waist belts, this harness works the full upper torso. The shoulder straps taper to open-end points rather than looping over — meaning the harness sits on the chest and underbust rather than over the shoulders, giving a clean line under sheer or open-back tops.

• Three silver O-rings: one at sternum junction, two at underbust cross-points
• Flat silver stud rivets spaced approximately 2-3 cm apart along each strap
• Strap width approximately 1.5 cm throughout — narrow enough for layering
• Smooth matte black faux leather exterior with a slightly stiffer hand feel for structure
• Open-tip shoulder ends — note these are not adjustable loops, so fit is size-specific

Sizing & Fit

The harness is sized to wrap the underbust band snugly at approximately 60-90 cm underbust circumference (roughly XS-L depending on torso length). Shorter torsos benefit most from the compact Y-frame; those with a torso longer than 40 cm shoulder-to-underbust may find the chest O-ring sits lower than intended. This is not a plus-size or 2XL+ fit — the fixed-length straps do not extend beyond the stated range.

• Underbust band fits approximately 60-90 cm
• Best on torso height 35-40 cm (shoulder base to underbust)
• Shoulder strap length fixed — measure before ordering if between sizes
• Wear over a bra or bodysuit for coverage; the harness itself provides no chest support

Material & Care

The straps are vegan faux leather — a PU-coated synthetic that holds its shape and resists scuffing better than stretch fabrics. The O-rings and studs are zinc-alloy with silver-tone plating; avoid prolonged contact with moisture to prevent tarnishing. Wipe the straps clean with a barely damp cloth and allow to air-dry flat — do not machine wash, tumble dry, or iron, as heat warps the PU coating.

• Outer: PU faux leather (animal-free, vegan)
• Hardware: zinc-alloy O-rings and stud rivets, silver-tone finish
• Care: wipe-clean only; no machine washing
• Trade-off: PU coating may crack at sharp fold points over extended daily wear — rotate with other pieces

Styling & Occasion

For festival and outdoor looks, layer the harness over a white cropped tee or a mesh long-sleeve top — the black straps read clearly against light fabric. For a evening aesthetic, pair with high-waisted satin briefs and leave the harness as the sole top layer. At night events, it works over a fitted black turtleneck for a graphic, tonal layered effect where the hardware catches light against the matte straps. The compact strap width means it also fits under a sheer blouse without adding visible bulk at the sides.