Reflective Cross-Strap Body Harness with Faux Leather Rivet Plate

This white reflective cross-strap harness forms a fixed X across the upper back and chest, anchored by a compact faux leather plate secured with silver-tone rivets where the straps meet. The 3 cm wide reflective straps throw back light from headlights, phone flashes, or stage lighting, turning the harness into a night-visibility layer and a graphic body accessory at once. Worn alone over bare skin or layered on top of a fitted tank, the crossed silhouette reads as one continuous line from shoulder to waist, with the rivet plate sitting squarely between the shoulder blades as the fixed center point.

Reflective Strap Construction

Two straps cross at a single faux leather center plate, each finished at roughly 3 cm in width so the reflective surface stays visible without digging into the shoulder. The plate carries four silver-tone rivets set around a central cutout, giving the crossing point a fixed anchor instead of a loose knot, and the strap edges are finished flat rather than rolled so the reflective face stays fully exposed at every angle.

• Two 3 cm wide straps forming a fixed X across the back
• Faux leather center plate with four silver-tone rivets
• Reflective surface visible under flash, headlights, or stage light
• Adjustable shoulder loops for a closer or looser cross point
• Worn bare-chested or layered over a fitted tank top

Styling for Night Out

Paired with high-waisted trousers and boots, the reflective X reads as a standalone piece for a festival or club night where the straps catch stage lighting and photograph well under flash. Layered over a plain black tank for a late walk or bike ride home, the same straps work as a visibility layer rather than a purely decorative one; a trade-off worth noting is that the reflective finish is more functional after dark than in daylight, where it reads as plain white with no visible shine. For a boudoir-adjacent look at home, the harness sits well over bare shoulders with the plate as the single structured detail against skin.

Sizing and Fit Range

The harness ships in six size labels covering a wide range: XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL, and 6XL/7XL. The crossing straps and shoulder loops adjust independently, so the plate sits centered between the shoulder blades on both a narrow S/M frame and a broader 6XL/7XL build, and the X angle stays roughly the same across the size range rather than flattening out on wider torsos.

• Six labeled sizes from XS/S through 6XL/7XL
• Independent strap adjustment at each shoulder loop
• Fits narrow and broad shoulder widths within the labeled range
• Not intended to sit under a fitted jacket due to strap thickness

Material and Care

The straps combine a woven base with a reflective coating, while the center plate is faux leather riveted with silver-tone metal hardware. Hand wash the straps in cold water and air dry flat, since the reflective coating can dull under high heat or machine tumbling. With normal wear the rivets hold the plate in place without loosening, though the reflective coating will gradually dim after repeated washing, which is worth knowing before machine washing it by mistake. Storing the harness flat rather than folded at the plate also keeps the rivets from creasing the surrounding faux leather over time.