Red Faux Leather Body Harness with O-Ring Chains

This red faux leather body harness pairs a multi-strap chest cage with silver-tone O-ring chain connectors and two fully detachable wrist cuffs — a set format that goes beyond a standard harness bra. The straps form a Y-front configuration that sits across the chest and wraps around the torso, with each O-ring spaced approximately 4-5 cm apart along the horizontal band.

Chain Hardware and Cuff Details

Six silver O-rings link the front horizontal strap, while two silver chain drops — each roughly 8 cm long — connect the main harness to a pair of wide-cuff wrist bands in matching red faux leather. The cuffs attach via lobster-claw clasps, so you can wear the harness alone or add both cuffs for a layered festival or boudoir aesthetic. Hardware is silver-tone metal throughout; no mixed finishes.

• Six silver O-rings spaced along the front chest strap
• Two detachable wrist cuffs in matching red faux leather
• Silver chain drops approximately 8 cm per side
• Lobster-claw clasps for cuff removal in seconds
• Strap width approximately 1.5 cm on secondary bands

How to Style for Occasions

Worn over a fitted black mesh bodysuit, the red contrast reads as a statement layer for festival season. For a boudoir aesthetic, pair with high-waisted satin shorts and leave the cuffs attached — the chain drop frames the wrists without adding bulk. The harness also sits cleanly under an open-front blazer for an intimate fashion editorial look, with the cuffs removed and pocketed.

• Festival: layer over sheer black mesh top with wide-leg trousers
• Boudoir: style over a satin bralette with matching red shorts
• Party: wear beneath an open blazer, chains visible at the neckline
• Editorial: cuffs detached, harness alone over a structured corset

Sizing and Fit Range

The back strap uses multiple snap or buckle adjustment points, accommodating a chest circumference of approximately 70-110 cm (roughly XS through 3XL). The Y-front straps are fixed in length, so buyers with a very long torso above 50 cm may find the front panel sits higher than the natural underbust line — this is the one honest trade-off of the fixed-front construction. The wrist cuffs adjust from approximately 14 cm to 20 cm circumference and fit most wrist sizes.

Faux Leather Material and Care

Straps and cuffs are cut from smooth red faux leather (PU-coated synthetic), which holds its color well against light friction but should not be submerged in water. To clean, wipe with a lightly damp cloth and allow to air dry away from direct heat. The silver-tone hardware is zinc alloy; avoid prolonged contact with moisture to prevent tarnishing. Do not machine wash, tumble dry, or iron.