Plus Size Faux Leather Full Body Harness with Thigh Chains

This black faux leather full body harness extends from a choker-style neck strap through a multi-band chest cage to dual silver-tone chains that drop to structured thigh bands — covering chest, waist, and upper leg in one cohesive piece. The waist belt acts as the central connector, anchoring the chest harness above and the thigh chains below so the whole system stays aligned even during movement. Unlike single-zone harnesses, this design layers three distinct silhouette regions simultaneously.

Chest Cage Construction

The upper section opens with a V-neck halter strap at the collar, then fans into four horizontal bands across the ribcage, each secured with silver grommet hardware. A large O-ring sits at the sternum, giving the chest a focal anchor point. An additional lace-style strap detail runs diagonally across the upper chest, adding depth without bulk. Strap width across the chest bands is approximately 1.5 cm, wide enough to lie flat without rolling.

• Choker-style neck strap with silver stud detailing
• Four horizontal chest bands with grommet closures
• Central O-ring at sternum — approximately 3 cm diameter
• Diagonal lace-strap detail across upper chest
• All hardware is silver-tone metal

Thigh Chain Detail and Waist Connection

Two silver-tone chains hang from the waist belt on each side, connecting at mid-thigh to cross-strap thigh cuffs. The thigh bands mirror the chest construction — two horizontal bands with grommet studs — ensuring visual consistency top to bottom. Chain drop length is approximately 35-40 cm from waist to top of thigh band, making this suit most proportionate on torso lengths of 55-70 cm. The waist belt adjusts via a center-front buckle.

• Dual silver-tone drop chains connecting waist to thigh cuffs
• Chain drop approximately 35-40 cm for standard torso proportions
• Cross-strap thigh cuffs with horizontal band construction
• Waist belt with center-front buckle adjustment

Sizing and Fit Notes

The harness is sized XS through 7XL with all straps adjustable across the back, waist, and thigh sections. Waist adjustment range is approximately 65-140 cm; thigh bands adjust from approximately 45-90 cm circumference. The design photographs best on torsos where the waist and thigh are proportionate — if your thighs are significantly narrower than your waist, the chains may angle inward. Sizing up is recommended if you are between sizes, as the straps tighten but do not extend beyond their tab length.

Material and Care

All straps are faux leather (PU synthetic) — animal-free and consistent in finish across the full piece. The hardware is silver-tone zinc alloy; it is decorative grade, not load-bearing. Wipe clean only with a dry or slightly damp cloth — do not submerge, machine wash, or tumble dry, as water will soften the PU coating and dull the hardware finish. Store flat or loosely coiled to prevent strap creasing. The thigh chains are linked metal and should be inspected after each wear to ensure no links have bent open.