Multi-Layer Chain & O-Ring Faux Leather Belt

This black faux leather belt layers three distinct strap bands into one waist-cinching statement piece: a top grommet strap punched with silver eyelets, a mid strap threaded with a silver chain and O-ring hardware, and a lower strap featuring a hanging O-ring pendant. The construction is entirely synthetic and animal-free, keeping the glossy finish consistent across all three layers.

Silver Hardware Details

Every metal accent is finished in silver-tone hardware. The center strap runs a flat-link silver chain through two large O-rings, while the lower strap carries a single hanging O-ring roughly 3 cm in diameter. Silver dome studs anchor each strap join, and the grommet row on the top strap adds a punk-adjacent edge without relying on spikes. The layered look sits approximately 8-10 cm tall at the waist when all three bands are worn together.

• Top strap: silver grommet eyelets spaced 2 cm apart across the full width
• Mid strap: flat-link chain threaded through two central O-rings
• Lower strap: single hanging O-ring pendant, approximately 3 cm diameter
• All hardware: silver-tone metal with a polished finish

Festival and Party Styling

Worn over a fitted black slip dress (as pictured), all three straps stack flat and read as a structured corset-style waist detail. For a festival outfit, pair with high-waisted wide-leg trousers and a plain cropped cami — the chain layer catches the light against light-coloured fabric. For a party look, layer over a fitted blazer worn as a top: the O-ring pendant hangs below the hem and adds movement. Note that the layered construction sits best on smooth, non-bulky fabrics; thick knitwear may cause the straps to shift.

• Over a slip dress: reads as a structured corset waist accent
• Over a blazer-as-top: pendant hangs freely for movement effect
• Festival pairing: contrast against light trousers to highlight chain detail
• Boudoir aesthetic: worn solo over bare skin for editorial shoots

Sizing and Fit

The belt adjusts via standard prong buckles on each strap independently, allowing the three layers to be sized separately for a precise fit. The usable adjustment range spans approximately 65-95 cm at the waist, making it suitable for waist measurements roughly XS through XL. The total belt length (tip to first hole) is approximately 105 cm. Buyers with a waist above 95 cm will find the hardware placement shifts off-center, which is the main fit limitation. Each strap is approximately 1.5 cm wide and lies flat without curling under tension within that range.

Material and Care

All three straps are cut from vegan faux leather — a PU-coated textile with a smooth, low-sheen surface. No animal products are used. The material resists light surface scuffs but is not waterproof; prolonged moisture exposure can dull the PU finish over time. Wipe clean only with a dry or lightly damp cloth — do not submerge, machine wash, or use solvent-based cleaners. Store flat or rolled loosely to prevent crease lines forming across the strap width. The hardware is attached with rivets and does not require any maintenance under normal use.