Full Caged Faux Leather Body Harness with O-Ring Leg Straps

The Full Caged Faux Leather Body Harness with O-Ring Leg Straps is a structured black faux leather piece that spans from the shoulders to the upper thighs, creating a continuous cage silhouette over the entire torso and upper legs. Unlike a standard chest harness, this design integrates dual horizontal thigh bands connected to the waist section via vertical side straps, making it a true full body harness rather than a chest-only piece. The central waist O-ring in silver-tone metal anchors the geometry of the whole construction.

Chest and Torso Cage Detail

The upper section forms a classic cage harness bra pattern: two shoulder straps split into a V-neck configuration, meeting horizontal chest bands that frame the bust without covering it. Multiple horizontal straps stack across the ribcage between the chest and waist, each secured with silver-tone adjustable buckles approximately 1.5 cm wide. The faux leather strips have a smooth matte finish with a firm hand feel, holding their shape without rolling during wear.

• Cage chest structure with three stacked horizontal torso bands
• Silver-tone metal O-ring centered at the natural waist
• Strap width approximately 1.5 cm throughout for consistent visual weight
• Adjustable shoulder and torso buckles for custom fit
• Matte black faux leather — no patent sheen, no visible texture grain

Leg Strap and Garter Design

Two independent leg harness sections loop around each upper thigh with dual horizontal bands per leg, bridged by a short vertical connector that links to the lower waist panel. This garter harness format sits high on the thigh — approximately 5-10 cm below the hip crease — rather than at mid-thigh, so it reads as part of the full-body cage rather than a standalone leg accessory. Note that the leg straps are not attached to hosiery or stockings; they function as standalone thigh bands.

• Dual thigh bands per leg, positioned at upper thigh
• Vertical connector links leg rings to lower waist panel
• Works over bare skin, sheer tights, or fitted base layers
• Leg bands not designed for stockings attachment — purely decorative strapping

Sizing and Fit

The harness is fully adjustable via individual buckles at each strap junction. The shoulder straps accommodate torso lengths from approximately 35 cm to 50 cm (shoulder to waist). Waist straps adjust from roughly 60 cm to 90 cm circumference, and thigh bands accommodate upper thigh circumferences from approximately 45 cm to 65 cm. Buyers with a thigh circumference above 70 cm may find the leg bands restrictive; in that case, consider sizing up or choosing a harness without thigh straps. Available in XS through 7XL with extended sizing calibrated to each range.

Material and Care

All straps are cut from vegan faux leather — a PU-coated fabric backing with a smooth matte surface. The hardware is silver-tone zinc alloy with a fixed finish; avoid prolonged moisture exposure to prevent tarnishing. To clean, wipe straps with a damp cloth and mild soap, then air-dry flat away from direct heat. Do not machine wash, tumble dry, or iron. The PU surface resists light surface scuffs but will crack over time if folded sharply at the same point repeatedly — store flat or loosely coiled.