Full Body Harness with Reflective White X-Front Straps

This full body harness pairs a chest harness with a matching hip-to-thigh harness, both cut from reflective white faux leather straps that cross in a sharp X formation. A center O-ring anchors the bust section between the shoulder straps and the underbust band, while the lower piece repeats the X cross at the hip and continues in straight garter-style lines down the front of the thigh.

X-Front Harness Design

The bust harness uses two shoulder straps that meet at a center O-ring before crossing into an X over the chest and connecting to an underbust band. The lower harness sits at the natural waist and repeats the same X-front pattern, with two straps extending from the hip band toward the upper thigh. The two pieces are not physically joined, so they can be worn together for the full look or separately.

• Center O-ring connector between the shoulder straps and underbust band
• Reflective white faux leather straps approximately 1.5 cm wide
• Grommet rows on the chest and waist bands for adjustment
• Two garter-style thigh straps running down each leg to mid-thigh
• Worn over a top, bodysuit, or leggings for a layered harness look

Harness Styling Ideas

Layer the chest piece over a plain black bodysuit or crop top so the reflective white X reads clearly against a dark base, and add the thigh harness over leggings for a matching festival set. For a going-out look, pair both pieces with a slip dress underneath and let the straps sit visibly over the fabric rather than tucking them away.

Six-Size Fit Range

This harness is offered in six labeled sizes: XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL, and 6XL/7XL, so the underbust band, waist band, and thigh straps run larger on each size up rather than relying on a single fixed cut. Grommet buckles adjust the fit within each labeled size, letting the band sit snugly at the underbust and waist without cutting in. Buyers between two labeled sizes should size up on the waist band first, since the hip harness sits lower and reads tighter than the chest piece at the same label.

Faux Leather Care

Both harness pieces are made from faux leather (vegan leather) strapping with metal-tone grommet hardware at the adjustment points. Because the reflective coating is on the strap surface, the harness should be wiped clean with a damp cloth rather than machine washed, which protects the reflective finish from cracking over repeated cycles.

• Faux leather straps with a reflective white surface coating
• Metal-tone grommets and center O-ring hardware
• Spot-clean with a damp cloth; air dry away from direct heat

The reflective white colorway is built for low-light photos and evening wear, where the strap surface catches camera flash and stage lighting in a way a matte strap will not. One trade-off of the reflective coating is that it is less flexible than a plain matte faux leather strap, so the harness holds its crossed shape well but is not meant to be balled up or folded tightly in storage.