Full Body Cage Harness Set with O-Ring Garter Belt & Cuffs

This three-piece black faux leather set combines a caged chest harness, a cross-strap garter belt, and a pair of wrist cuffs — all connected by silver-tone O-ring hardware — into one coordinated evening look. Unlike single-piece body harnesses, the separates let you mix each component with other wardrobe pieces independently.

Chest Harness & Collar Detail

The upper piece opens with a fitted choker collar and fans into two diagonal straps that cross at a central O-ring before curving under the bust. The cage structure sits flat against the ribcage and does not rely on underwire, so it works over a bandeau or directly against skin. Silver-tone rivet closures on each strap allow incremental adjustment across approximately 60-100 cm bust circumference.

• Flat choker collar, approximately 1.5 cm wide, with rivet snap closure
• Central front O-ring, approximately 2.5 cm diameter, silver-tone metal
• Cross-front strap configuration, each strap approximately 1 cm wide
• No underwire — the cage sits as a fashion overlay, not a structural bra

Garter Belt & Leg Straps

The waist section uses a cross-wrap strap pattern anchored by four silver O-rings — two at the sides and two at the front hip — creating an X silhouette across the lower abdomen. Adjustable leg loops drop from the hip rings and close just above the knee, fitting thighs approximately 45-70 cm in circumference. Because the leg bands are fixed loops rather than suspender clips, they do not attach to stockings.

Wrist Cuffs Fit & Sizing

The matching wrist cuffs are approximately 5 cm wide, with two buckle-and-snap closures on each cuff. They fit wrists roughly 14-22 cm in circumference and can also be worn as arm cuffs just above the elbow. The set is sized XS through 4XL; buyers with wrists above 22 cm may find the cuffs snug at the smallest strap hole.

• Adjustable range: wrist circumference approximately 14-22 cm
• Cuff width: 5 cm, double-buckle closure per cuff
• Can be worn at wrist or just above elbow for a layered arm look
• Sold as a set — cuffs are not available separately

Material & Care

All three pieces are constructed from matte black faux leather (PU synthetic) — animal-free and vegan-friendly. The inner contact surfaces are unlined; the smooth PU backing sits directly against skin. Metal hardware is silver-tone zinc alloy. Wipe clean only — do not submerge in water or machine wash, as prolonged moisture softens the PU bonding layer. Store flat or rolled loosely to avoid permanent crease marks in the straps.

• Outer: matte black PU faux leather, no surface embossing
• Hardware: silver-tone zinc alloy O-rings and rivets
• Care: wipe with a damp cloth, air dry flat — no machine washing
• Vegan and animal-free materials throughout