
Sexy Harness
Collared Full Body Harness with O-Ring
Color
Please select a color
Size
Please select a size
- SKU
- APFT19-S1
- Barcode
- 9,75E+12
- Weight
- 0.200
- Categories
- Chest Harness
Product Details
| Care Instructions | Wipe clean with damp cloth; air dry flat; no machine wash; avoid heat |
| Lining | Unlined; smooth PU reverse side against skin |
| Closure | Adjustable buckle at collar rear; buckle or side-release at waist |
| Material | Smooth matte black PU faux leather, animal-free synthetic |
Related Searches
Frequently Asked Questions
Product Detail
Black faux leather body harness with a wide collar, chest O-ring, and waist O-ring band.
- ✓Wide collar band approximately 3 cm tall with rear adjustable buckle closure
- ✓Dual silver O-rings: chest ring approximately 3 cm, waist ring approximately 5 cm diameter
- ✓Central vertical strap approximately 1.5 cm wide connecting collar to waist band
- ✓Adjustable waist band fits approximately 60 cm to 100 cm waist circumference
- ✓Smooth matte black faux leather (PU synthetic), animal-free vegan construction
- ✓Silver-tone zinc alloy hardware with stud rivets at all connection points
- ✓Fixed-length center strap suits torso lengths 38 cm to 50 cm — limited adjustability mid-body
- ✓Inclusive sizing from XS to 7XL based on waist measurement
The Collared Full Body Harness with O-Ring sets itself apart from standard chest harnesses by opening at the neck — a wide faux leather collar sits against the throat and anchors the entire piece, so the structure reads as a complete top-to-waist look rather than a floating chest strap. A single central vertical band runs from collar to waist, where a large silver O-ring sits front-center on a horizontal waist band, framing the torso with deliberate geometry.
Collar and O-Ring Details
Two O-rings at different heights create a layered focal point that most body harnesses lack. The chest-level silver O-ring marks the junction where the vertical strap meets the body, while the waist-level O-ring — noticeably larger in diameter — anchors the horizontal band and draws the eye to the midriff. Silver stud rivets reinforce each connection point, adding industrial texture against the flat matte black faux leather.
- Wide collar band approximately 3 cm tall, closes at the back with an adjustable buckle
- Chest O-ring approximately 3 cm diameter, silver-tone metal hardware
- Waist O-ring approximately 5 cm diameter, silver-tone metal hardware
- Central vertical strap width approximately 1.5 cm
- Waist band width approximately 1.5 cm with side-release or buckle adjustment
Festival and Evening Styling
Worn over a sheer black bodysuit, this harness defines the torso silhouette for festival or nightclub dressing without requiring additional layering. For a evening aesthetic, pair it directly over bare skin against high-waisted wide-leg trousers — the collar adds formality that reads as intentional fashion rather than an afterthought accessory. The minimalist single-strap design also layers cleanly under an open blazer or sheer top for street-level styling.
- Over a sheer black bodysuit for festival or concert outfits
- Worn directly on skin with high-waisted trousers for evening portrait sessions
- Under an open oversized blazer for a structured avant-garde street look
- Layered over a crop top for party and club wear
Sizing and Fit Range
The adjustable collar and waist band accommodate a neck circumference of approximately 32 cm to 44 cm and a waist circumference of approximately 60 cm to 100 cm. The vertical strap length is fixed, so the harness fits best on torso lengths of roughly 38 cm to 50 cm from base of neck to natural waist. Buyers with torsos outside this range may find the O-ring placement sits higher or lower than intended — this is a trade-off of the fixed-length center strap design. Available in sizes XS through 7XL; select your closest waist measurement when choosing size.
Faux Leather Material and Care
Constructed from smooth matte black faux leather (PU coated synthetic), the straps hold their flat shape without curling at the edges — a common issue with thinner vegan leather alternatives. The silver-tone hardware is zinc alloy, which resists tarnishing under normal wear conditions. Do not machine wash; wipe the faux leather surface with a damp cloth and mild soap, then air dry flat. Avoid prolonged exposure to heat or direct sunlight, which can cause PU coating to crack over time.
Customer Reviews
0No reviews yet.
You can only review products you have purchased and received.
Same Products
Best Seller Belts
Collared Full Body Harness with O-Ring
$21.90

















