Caged Faux Leather Overlay Skirt with O-Rings

This black faux leather overlay skirt layers a structured diamond-grid cage over your existing outfit rather than functioning as a standalone skirt. Each intersection of the 1.5 cm wide straps is secured with a silver O-ring, creating a repeating lattice that falls from a fitted waistband to midi length — roughly knee to mid-calf depending on your torso height.

Diamond Cage Construction

The strap network is built from flat faux leather bands cut to uniform width and assembled into large diamond-shaped openings, each roughly 15 cm across at the widest point. The silver-tone O-rings at every crossing point do double duty: they hold the cage geometry rigid while adding a hardware-forward aesthetic that reads as bold fashion accessory rather than simple skirt. The open-hem finish at the bottom row allows the final ring of O-rings to hang freely, creating subtle movement with each step.

• Strap width: approximately 1.5 cm across all bands
• Silver-tone O-rings at every lattice intersection
• Open diamond cells approximately 15 cm at widest
• Fitted black waistband with adjustable closure at back
• Raw open hem at lower edge — intentional design, not damage

How to Style This Overlay

Because the cage is an overlay, it pairs with whatever base layer sits underneath — the model wears white leggings and a white bodysuit, which creates a graphic monochrome contrast. For a festival look, layer over a black bodysuit and bike shorts so the harness-style strapping reads as the sole visual focus. For a party-night outfit, wear over a slip dress or fitted midi skirt in a contrasting color — deep burgundy or cobalt beneath black cage creates a strong color-block effect. The waistband sits at the natural waist, so high-waisted bottoms underneath work best to align the layers cleanly.

• Festival: black cage over white bodysuit and wide-leg trousers
• Night out: worn over a fitted satin slip dress for contrast texture
• Evening aesthetic: layered over a matching black lingerie set

Sizing and Fit Notes

The waistband is the key fit point. The adjustable back closure accommodates waists approximately 60-100 cm; if your waist exceeds 100 cm the waistband will sit too tight and the diamond cells will distort. The overlay length is fixed — on a 165 cm frame it falls to mid-calf; on a 175 cm frame it lands just below the knee. The cage does not compress or shape the hips — it drapes over the body purely as an overlay, so hip measurement does not restrict fit. This product is not suited to very petite frames under 155 cm as the waistband will sit proportionally too wide on the torso.

Material and Care

The straps are cut from smooth-finish faux leather (PU-coated fabric), which holds its flat shape without creasing like genuine textile. The O-rings are zinc alloy with silver-tone plating. Wipe the faux leather clean with a damp cloth — do not submerge in water or machine wash, as prolonged moisture will degrade the PU coating at the stitched joints. Store flat or loosely coiled to prevent the straps from developing permanent kinks. The silver plating on the O-rings may show minor wear with heavy use, which is typical of zinc alloy hardware.

• Material: smooth PU faux leather straps, vegan and animal-free
• Hardware: zinc alloy O-rings, silver-tone plating
• Care: wipe clean only, no machine wash, store flat
• Honest trade-off: open cage construction offers no coverage or warmth — base layer required