Black O-Ring Full Body Harness with Chest Cage and Leg Straps

This black faux leather full body harness runs from a structured caged chest bralette frame all the way down to adjustable leg straps, connected through a central waist O-ring that anchors the entire silhouette. Narrow straps — approximately 1 cm wide — keep the profile clean and graphic against the skin or over clothing.

Chest and Waist Design

The upper section features a caged bra construction: two curved straps form each cup outline, converging at a silver O-ring centered on the sternum. A second large silver O-ring sits at the waist, from which four diagonal straps radiate outward to hip tabs, creating a geometric star-burst pattern. All hardware is silver-tone metal.

• Structured chest cage with curved strap bralette silhouette
• Central sternum O-ring, approx. 2 cm diameter
• Waist O-ring, approx. 4 cm diameter, anchors lower harness
• Geometric star-burst hip strap configuration
• Shoulder straps adjustable via sliding buckles

Leg Strap Construction

Two pairs of leg straps hang from the waist section, each fitted with belt-style buckle adjusters and a smaller O-ring at mid-thigh level. The straps terminate in tapered tails for a sleek finish. This garter-style extension is the key feature separating a full body harness from a standard chest harness — note that the leg straps sit at the outer thigh and are not designed to connect to stockings.

• Two pairs of adjustable outer-thigh leg straps
• Belt-buckle closures allow sizing from approx. 45 cm to 70 cm thigh circumference
• Silver O-ring detail at mid-thigh on each strap
• Tapered strap ends, no raw edges

How to Style for Festival or Boudoir

Wear the harness directly over bare skin for a boudoir aesthetic photo shoot, or layer it over a fitted black bodysuit for festival outfits. The caged chest frame reads as a harness bra silhouette when paired with high-waisted shorts. For party wear, try it over a sheer mesh top — the geometric strap pattern stays visible and graphic through semi-transparent fabric. The all-black body with silver hardware also works over a white button-down tied at the waist for a contrast editorial look.

Sizing and Fit

The shoulder, chest, and waist straps all adjust independently via sliding bar buckles, accommodating bust circumferences from roughly 70 cm to 110 cm and waist circumferences from 60 cm to 100 cm. The leg straps extend to fit thighs up to approximately 70 cm. Buyers with very high hip-to-waist ratios above 40 cm differential should note the waist and hip tabs may require additional adjustment at first wear. This harness is designed for XS through 3XL body frames; it is not recommended for thigh circumferences above 72 cm as the leg strap tails become very short.

Material and Care

Constructed from faux leather (PU-coated synthetic) — animal-free and vegan-friendly. The straps have a smooth, slightly glossy surface with a subtle flexible feel. Hardware is silver-tone zinc alloy. To clean, wipe straps with a damp cloth and mild soap; do not submerge in water or machine wash. Avoid prolonged exposure to direct sunlight to prevent surface cracking. The faux leather is less stiff than genuine leather, which makes it comfortable for extended wear but means the straps may show minor creasing after repeated use.