Black Faux Leather O-Ring Chest Harness with Dual Underbust Bands

This black faux leather chest harness pairs a single looped neck strap with a central silver O-ring and two parallel underbust bands, creating a structured triangular bib that sits flat against the sternum. The construction is intentionally spare — no excess hardware, no padding — so the focus stays on the geometric silhouette and the contrast between matte black straps and polished silver metal.

Chest Harness Styling Options

Worn over a white button-down left open at the chest, the harness reads as a sharp office-to-evening accessory. For a festival body harness look, layer it directly over bare skin or a sheer mesh bodysuit and pair with high-waisted shorts. The neck loop sits comfortably above the collarbone and works with off-shoulder and plunge necklines where a conventional harness bra would show too much hardware.

• Over a sheer bodysuit for a boudoir aesthetic layering look
• Under an open blazer for an editorial, fashion-forward silhouette
• Worn solo over bare skin at outdoor festivals or costume events
• Layered over a fitted turtleneck for an architectural, strappy harness contrast

Sizing and Underbust Fit

The dual underbust bands adjust via side-mounted silver slide buckles. Band circumference spans approximately 60 cm to 85 cm, fitting most XS through L torso measurements. The neck loop is a fixed continuous strap approximately 55 cm in total length and does not adjust — buyers with a longer neck or broader shoulders may find the neck loop sits higher than expected. This harness is designed as a chest accent piece, not a full body harness, so it does not extend below the ribcage.

• Underbust band range: approx. 60 cm to 85 cm (adjustable)
• Neck loop: fixed at approx. 55 cm total length, non-adjustable
• Best fit: XS to L torso circumference
• Not recommended for underbust measurements above 90 cm

Faux Leather Material and Care

The straps are cut from smooth matte faux leather (PU-coated synthetic), which holds its shape without stretching and resists surface scuffs better than stretch vinyl alternatives. Hardware consists of silver-tone metal O-rings and rectangular slide buckles secured with small dome-head rivets visible at each strap junction. Do not machine wash — wipe with a slightly damp cloth and allow to air dry flat. Avoid prolonged exposure to direct sunlight, which can cause the PU surface to crack over time.

• Material: smooth matte PU faux leather straps, animal-free
• Hardware: silver-tone metal O-ring (approx. 2.5 cm diameter) and rectangular slide buckles
• Rivets: dome-head metal, reinforcing every strap junction
• Care: wipe clean only, air dry flat, store away from direct sunlight

Vegan Leather Harness Construction

As a vegan leather harness option, this piece uses no animal-derived materials throughout — the straps, backing panel, and all contact surfaces are fully synthetic. The triangular chest panel provides a rigid anchor point that prevents the underbust bands from riding up during movement, a common limitation in all-strap chest harness designs. Strap width measures approximately 1.2 cm, narrow enough for a sleek, linear aesthetic without digging into the skin during a few hours of wear.