Black Faux Leather Full Body Harness with O-Rings & Garters

This black faux leather full body harness combines a solid triangular chest panel with crossover torso straps and thigh-wrapping garters — a structured, three-zone design that sets it apart from single-strap or purely decorative harnesses. The narrow 1.5 cm straps create geometric lines against the body, while six silver metal O-rings serve as load-bearing junctions rather than ornamental accents.

Chest Panel & Strap Configuration

The upper section features a rigid-profile triangular faux leather chest panel that frames the bust without the need for underwire. From the panel, two shoulder straps connect to a rear neck loop, while two under-bust straps feed into the torso section. The crossover torso straps form an X-pattern at the midsection, anchored by a central O-ring, then split into four straps that wrap the hips and connect to the garter section.

• Triangular chest panel approx. 20 cm across at the widest point
• Shoulder straps adjustable from 30 cm to 50 cm in length
• Six silver metal O-ring connectors at structural junctions
• Crossed torso straps sit approximately 2 cm apart at the X-junction
• All strap widths: 1.5 cm — slim profile, visible against any outfit layer

Thigh Garters & Lower Section

The garter straps descend from the hip band and wrap around each thigh independently, secured with a small O-ring buckle at the outer thigh. This creates a full-body silhouette from collarbone to mid-thigh. Each garter strap adjusts by approximately 10 cm to accommodate thigh circumferences from 45 cm to 70 cm. Note: the garters are not designed as hosiery clips — they hold their position through strap tension alone, with no stocking attachment function.

• Garter straps adjustable across 10 cm range per leg
• Thigh fit range: 45 cm to 70 cm circumference
• Garter O-ring buckle sits at outer thigh for clean silhouette
• Lower straps can be worn tucked into high-waisted bottoms for a partial-harness look

How to Style This Harness

Worn over a fitted white long-sleeve top and leggings, this black body harness creates a high-contrast editorial look suited to festival season, costume parties, and editorial photography. For a streetwear-adjacent approach, layer it over a black turtleneck with wide-leg trousers — only the chest panel and shoulder straps will be visible, giving the silhouette of a harness bra with a concealed structure underneath. For evening aesthetic shoots, wear the harness standalone over skin to highlight all six O-rings and the full strap geometry.

Sizing & Fit

This harness is designed to fit bust measurements from 75 cm to 135 cm and waist measurements from 60 cm to 120 cm, covering XS through 7XL. The adjustable shoulder straps and underbust band mean the chest panel sits correctly across a wide range of torso lengths. Buyers with a very short torso (under 40 cm sternum-to-waist) may find the torso straps sit slightly lower than intended — a genuine trade-off of the fixed-junction strap system. The thigh garters suit hip measurements from 80 cm to 140 cm.

Material & Care

All straps and the chest panel are constructed from black faux leather (PU synthetic) — entirely animal-free vegan leather with a smooth, semi-gloss surface. Hardware is zinc-alloy O-rings with a silver-tone finish. The material is wipe-clean: use a soft damp cloth to remove surface marks. Do not submerge in water, do not machine wash, and store flat or loosely rolled to prevent permanent creasing in the chest panel. Avoid prolonged direct sunlight, which can dull the semi-gloss finish over time.