Adjustable Faux Leather Body Harness with O-Ring Detail

This black faux leather body harness spans from shoulder to thigh in a single connected strap system, with silver-tone O-rings at every junction point — chest cross, waist, and lower hip panels — so the hardware itself becomes the visual focus rather than a subtle accent. The straps measure approximately 1 cm wide, sitting flat against the skin without digging, and the lower section is cut in a thong silhouette that eliminates visible panty lines under sheer or open-back garments.

Strap Configuration and O-Ring Hardware

The harness runs two shoulder straps down to a chest cross, then branches into a waist band secured by a front-center O-ring, and finally splits into thong-style lower straps anchored at the hips. Each junction uses a silver metal O-ring rather than a plastic loop, which keeps the hardware from flexing out of shape with wear. Rivets at stress points reinforce the strap-to-ring connections so the geometry holds during active movement.

• Silver-tone metal O-rings at chest cross, waist center, and two hip junctions
• Narrow 1 cm wide flat straps for low-profile layering under sheer tops
• Riveted reinforcement at all strap-to-ring stress points
• Thong-style lower cut — no visible panty line under open-back dresses
• Single-piece connected system: shoulder, chest, waist, and hips in one harness

Festival and Evening Occasion Styling

As a full body harness, this piece works across multiple styling contexts where a waist or chest harness alone would not. For a festival look, wear it over a white ribbed crop top with high-waist wide-leg trousers — the black strap-and-silver-ring geometry shows clearly against pale fabric. For a evening aesthetic, pair it directly over skin with a longline blazer worn open; the thong base means the lower harness is visible but not bulky beneath tailored cuts. The harness also layers over a bodysuit for editorial or party looks where bold self-expression is the goal without full exposure.

• Over a sheer or mesh top for festival layering
• Worn directly over skin beneath an open blazer for intimate fashion styling
• Layered over a black bodysuit to add strap texture and silver hardware contrast

Sizing and Fit Notes

The adjustable buckles on the shoulder and waist straps allow this harness to fit a bust range of approximately 70 cm to 110 cm and a waist range of approximately 60 cm to 100 cm. The size range covers XS through 3XL for the main torso fit. The lower thong strap has limited adjustment range, so buyers with a hip measurement above 115 cm may find the lower section tight — in that case a dedicated plus-size harness with extended hip hardware would be a better fit. The 1 cm strap width means the harness sits without adding bulk, but it also means there is no padding, which some wearers prefer to be aware of for longer wear sessions.

Faux Leather Material and Care

The straps are cut from smooth-surface faux leather (PU-coated polyester backing), which has the gloss and structure of a leather harness without animal-derived materials — consistent with a vegan leather finish. The O-rings and rivets are zinc-alloy with a silver-tone plating that holds well in dry conditions but can dull with prolonged moisture exposure. Wipe clean with a damp cloth only — do not submerge, machine wash, or use solvent-based cleaners, which degrade the PU coating. Store flat or loosely coiled to prevent permanent crease marks in the straps.

• Faux leather (PU-coated polyester) body — animal-free, vegan leather finish
• Smooth gloss surface maintains strap geometry without stretching
• Zinc-alloy silver-tone O-rings and rivets — avoid prolonged moisture exposure
• Wipe clean with damp cloth; no machine wash, no solvents
• Store flat to prevent strap creasing